Bangalore based manufacturer and supplier of premium quality awnings such as fossil frame, nebula, lunar, meteor, vertical blinds and venetian blinds
Fossil
Nebula
Lunar
Meteor
Blinds



      

Meteor

Meteor
Click here for an enlarged view

Meteor Front Bar
The meteor front bar is a sleek designed profile to create a balance between looks, strength and economy. It is satin smooth silver anodized, and gives a sleek and elegant look to the entire awning

Shoulder Brackets / Gear box / Side Plate (for Projection of 8’-12’ or 2.5-3.5m)
The shoulder bracket / gear box and side plate is an elegantly designed assembly on the rear portion of the awning connecting the square tube. The roller tube is made of gravity die cast aluminum alloy and power coated in light grey color. A half side plate plastic cap completes the sleek look.

Automation by Somfy France
Retractable awnings provide freedom to have the “roof” or not to have it with a manual or automatic operation. Sensor controlled awnings are installed with wind, rain and sun sensors to open and close the awning during inclement weather. The automation comfort is at your fingertip control or automatically allowing your awnings to think for themselves.

Meteor Arm (for Projection of 8’-12’ or 2.5 – 3.5m.)
The meteor arm is our economical model consisting of smooth extruded profiles and gravity die cast parts. The meteor arm profile is satin smooth silver anodized for weather resistance. All joints and parts are chromatized and then light grey powder coated for optimal corrosion resistance and accentuating looks.

Retractable Arm / Elbow Joint (for Projection of 5’-7’ or 1.5 & 2m.)
The meteor arm is made of smooth extruded profiles and gravity die casted joints. The meteor arm profiles are satin smooth silver anodized for weather resistance. The joints are designed creatively to provide a fine-looking contoured arm. All joint are chromatized and then light grey powder coated for optimal corrosion resistance and syncing with the looks.

Arm Compensator Universal Brackets (for Projection of 5’-7’ or 1.5 & 2m)
The support compensator in the meteor is again a multi purpose bracket which functions as a support compensator for longer awnings and also as the bracket where an additional single arm is incorporated depending upon the length of the awning desired. In case single additional arm is required then the other end is closed with a plastic cap.

Arm Front Bar Joint (for Projection of 5’-7’ or 1.5 & 2m)
The joint between the arm and the front bar has been especially designed to hold the front bar from the bottom and is covered with plastic to provide good balance, increases the distance between the fabric and the arm to provide greater flexibility during high wind and velocities.

Universal Bracket (for Projection of 5’-7’ or 1.5 and 2m.)
The all-in-one bracket combines the side plate/shoulder along with the wall bracket on one side with gearbox fixture. The opposite side without the gearbox is a unique feature of it. Artistically designed, universal bracket is efficient and easy to install. This bracket also has the feature of changing the tilt position of the awning according to the requirement.




Home      |      About Us      |      Our Products      |      Trade Offers      |      Contact Us      |      Send Inquiry